How Do You Snake Past a 90 Degree Turn

If you need to snake past a 90 degree turn, you will need to use a flexible drain snake. Start by feeding the snake into the drain until you reach the blockage. Then, twist the snake around the blockage and pull it out.

Repeat this process until the blockage is removed.

How to Snake a Drain | Step by Step DIY Plumbing | Zillow

If you’re ever faced with a 90 degree turn while snakeing, there’s no need to panic. With a little bit of careful maneuvering, you can make it through without any trouble. Here’s what you need to do:

1. Start by aligning your body with the opening of the turn. This will give you the best chance of making it through without hitting any walls. 2. Slowly start to enter the turn, letting your body follow behind.

Keep your head and front portion of your body as close to the center of the turn as possible. 3. As you continue through the turn, begin to coil your body around itself. This will help you navigate the tight space and keep yourself from getting stuck.

4. Once you’ve made it past the turn, uncoil your body and resume snakeing as usual.

How to Snake a T Fitting

Are you looking to clear a clog in your drain but don’t have a plunger handy? If you have a snake, also known as an auger, you can clear the clog without having to call a professional. This guide will show you how to use a snake on a T fitting.

First, remove the cap from the T fitting. Next, feed the snake into the open end of the T fitting until you feel resistance. The resistance is likely caused by the clog.

Continue feeding the snake into the drain until you feel that the clog has been cleared. Finally, flush hot water down the drain to ensure that any residual debris has been removed.

How to Get Snake Past P-Trap

If you’re having trouble getting your snake past a P-trap, there are a few things you can try. First, make sure the P-trap is properly installed and that there’s no water in it. Next, try using a snake hook or something similar to guide the snake around the trap.

Finally, if all else fails, you can always cut a hole in the P-trap so that the snake can get through.

Snake 90 Degree Pipe

If you’re looking for a versatile, easy-to-use pipe for your next plumbing project, look no further than the snake 90 degree pipe. This type of pipe is perfect for a wide variety of applications, including connecting two pieces of PVC pipe at a right angle, or creating a T-shaped connection. It’s also great for repairing leaks in existing pipes.

The snake 90 degree pipe is made of durable PVC material that can withstand high temperatures and pressures. It’s available in a range of sizes to fit your needs, and it’s easy to cut and install with standard PVC cutting and gluing tools. Plus, it comes with pre-drilled holes so you can add fittings as needed.

Drain Snake Going Wrong Way

If you’ve ever had a clogged sink or toilet, you know the feeling of frustration that comes with it. You try to plunger and snake your way out of the problem, but sometimes the snake just doesn’t want to cooperate. When this happens, it’s possible that you’re putting the drain snake in wrong.

There are a few things you can do to make sure you’re using your drain snake correctly: – Read the instructions! This may seem like a no-brainer, but it’s important to make sure you understand how to use the tool before you start trying to fix your clog.

– Insert the end of the snake into the drain opening and push it down until you feel resistance. This is where the clog is likely located. – Apply pressure to the handle as you turn it clockwise.

The coils on the end of the snake will grab onto any debris in their path and help break up the clog.

Snaking a Shower Drain Past the Trap

When you think about it, a trap is designed to keep water in – not out. So how do you snake a shower drain past the trap? The answer is simple: You don’t.

You need to remove the trap first. Once the trap is removed, you can feed the snake directly into the drain line. Start by feeding the snake into the drain line at the highest point possible.

This will give you the best chance of clearing any blockages. Work the snake down the drain line until you feel resistance. At this point, start turning the handle clockwise to break up any clogs.

Once you’ve broken through the clog, continue working the snake down the drain line until it comes out clean. Replace the trap and run some hot water down the drain to flush away any debris that may have been dislodged during snaking process.

How Do You Snake Past a 90 Degree Turn


How Do You Get a Drain Snake Past 90 Degree Elbow?

When you need to clear a drain that is blocked by a clog, one of the best tools you can use is a drain snake. A drain snake is a long, flexible rod that has a spiral tip that can break up the clog and allow water to flow through again. If there is a particularly tough clog, the drain snake also has barbs on the end that can grab onto the clog and help pull it out.

One of the challenges of using a drain snake is getting it past tight bends in the pipe, such as 90 degree elbows. The good news is that there are special tips available that are designed for this purpose. These tips have a small hook or barb on the end that can help grab onto the clog and pull it through even tight bends.

If you’re not sure which type of tip to use, ask your local hardware store or home improvement center for assistance. They should be able to help you select the right one for your particular needs.

How Do You Get a Snake Past a Bend?

If you need to get a snake past a bend, the best way to do it is by using a snake hook. A snake hook is a long, curved tool that is designed specifically for handling snakes. It can be used to grab the snake behind its head, which will allow you to control its body and safely guide it through the bend.

Why Won’T My Plumbing Snake Go around My Elbow?

If your plumbing snake won’t go around your elbow, it’s likely because the snake is too small for the pipe. To fix this problem, you’ll need to get a larger snake.

Why Won T My Drain Snake Make a Turn?

If you’re having trouble getting your drain snake to make a turn, there are a few things you can try. First, check to see if the snake is kinked or tangled. If it is, straighten it out and try again.

If that doesn’t work, try using a different drain snake. Some snakes are better suited for making tight turns than others. Finally, if all else fails, you may need to call a professional plumber to help clear your drains.


In order to snake past a 90 degree turn, you will need to use a little bit of creativity and innovation. There are a few different ways that you can approach this, but the most important thing is to make sure that you have enough slack in your line. You may need to experiment with a few different methods before you find the one that works best for you, but eventually you should be able to get it done.

Leave a Comment

Home Advisor Blog

Home Advisor Blog is a reader-supported blog. This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.