How to Adjust Pool Return Eyeball

If your pool return eyeball is not pointing in the right direction, you can adjust it by loosening the retaining nut and turning the eyeball. To aim the eyeball in the desired direction, use a level to make sure it is pointing straight. Once you have the eyeball positioned where you want it, tighten the retaining nut to keep it in place.

Return Eyeballs

  • Locate the return fitting on the pool wall
  • This is usually a round fitting with a screw in the center
  • Use an adjustable wrench to loosen the screw in the center of the return eyeball
  • rotate the eyeball until it is pointing in the direction you want the water to flow
  • Tighten the screw to lock the eyeball in place

Pool Return Eyeball Stuck

If you have a pool, you’ve probably had to deal with a stuck return eyeball at some point. It’s annoying, but luckily it’s an easy problem to fix.There are two main reasons why return eyeballs get stuck.

The first is that the O-ring that seals the connection between the eyeball and the return line gets old and brittle, and breaks. The second is that calcium deposits build up on the O-ring, preventing it from sealing properly.To fix a stuck return eyeball, start by checking the O-ring.

If it’s damaged or broken, you’ll need to replace it (you can find replacement O-rings at your local hardware store). If the O-ring looks fine but there are calcium deposits present, soak it in vinegar for a few hours to dissolve the deposits. Once the O-ring is clean, reattach it to the return line and screw on the eyeball tightly.

If your return eyeball continues to get stuck even after taking these steps, there may be an issue with your return line itself. In this case, you’ll need to consult a professional pool technician for help.

Pool Eyeball Seat Removal Tool

If you have a pool, you know that keeping it clean is important. But one of the most difficult parts of pool maintenance is removing the seats from the eyeballs in the pool. The Pool Eyeball Seat Removal Tool makes this task easy.

This tool is designed to remove the seats from eyeballs quickly and easily. It is made of durable stainless steel and has a comfortable grip. The tool comes with a lifetime warranty.

Pool Return Jet Replacement

If you have a pool, you know that the return jet is an important part of the pool’s filtration system. Over time, however, these jets can become clogged with dirt and debris. When this happens, it’s time to replace them.

There are a few things to keep in mind when replacing pool return jets. First, make sure you buy jets that are the same size as the ones you’re replacing. Second, take note of how the old jets are positioned in the pool so you can put the new ones in the same place.

Finally, be sure to clean out the area around the Jets before installing them to avoid any future clogs.Installing new return jets is a fairly easy process and should only take a few minutes. Simply unscrew the old jets and screw in the new ones in their place.

Once they’re tight, turn on your pool’s pump and check for any leaks. If everything looks good, enjoy your newly refreshed pool!

Best Pool Return Jets

If you have a pool, you know the importance of having quality return jets. Return jets are what circulate the water in your pool and keep it clean. They are an essential part of your pool’s filtration system.

There are many different types and brands of return jets on the market, so it can be difficult to know which ones are the best.To help you make an informed decision, we’ve compiled a list of the best pool return jets available. We’ve considered things like price, durability, and features to come up with our top picks.

Our first pick is the Pentair Jet-Vac Return Jet. This jet is made from durable ABS plastic and has a powerful suction that will quickly remove debris from your pool. It also comes with a convenient handle for easy removal when cleaning your pool.

If you’re looking for a more affordable option, take a look at the Hayward Power-Flo Matrix Return Jet. This jet is made from durable PVC and has a strong suction that will keep your pool clean. It also includes an adapter kit so that it can be used with either 1-1/2″ or 2″ plumbing fittings.

For those who want something that looks great as well as performs well, take a look at the Jandy stealth RGBW LED Return Jet Light Ring Kit. This kit includes an LED light ring that fits around most return jets and creates a stunning light show in your pool while providing excellent circulation. The kit also comes with color-changing remote control so that you can easily change the colors to match your mood or event.

How to Remove Pool Jet Nozzle

If your pool has a jet nozzle, you may find that it eventually needs to be removed. This can be due to a variety of reasons, such as clogging or damage. Whatever the reason, removing a pool jet nozzle is not a difficult task.

Here are the steps you need to take:1. Turn off the pump that powers the jet nozzle. This will ensure that there is no water pressure build-up when you remove the nozzle.

2. Locate the retaining ring that holds the jet nozzle in place. This ring is usually located just behind the nozzle itself. Use a pair of pliers to loosen and remove the retaining ring.

3. Pull the jet nozzle straight out from its housing. You may need to use some force, as there may be suction holding it in place. However, do not use too much force, as this could damage the housing or the nozzle itself.

4. Inspect the O-ring seal on the back of thejet nozzle . If this seal is damaged or missing, it will need to be replaced before you can reattachthejetnozzle . Otherwise, simply clean off any debris that may have accumulated onthe O-ring before proceeding to step 5 .

5 Reattachthejetnozzleby reversingthesteps above . Make surethatalloftheringsand sealsareintact and securebeforeturningonthepumptoavoidanyleaks .

How to Adjust Pool Return Eyeball


How Should I Aim My Return Jets in My Pool?

If you have a pool with return jets, you may be wondering how to aim them for the best results. There are a few things to consider when aiming your return jets.The first thing to think about is the shape of your pool.

If you have a rectangular pool, you’ll want to aim the jets so that they create a current from one end of the pool to the other. This will help circulate the water and keep it clean. If you have a free-form pool, you can aim the jets in any direction that you like.

Just keep in mind that they should be pointing away from any areas where people will be swimming or sunbathing.Another thing to consider is the size of your pool. If it’s small, you may not need to use all of the jets at once.

You can experiment with different combinations to see what works best for your pool. Additionally, if your pool is on the larger side, you may need to increase the flow rate of your pumps to ensure that all of the jets are effective.Finally, keep in mind that return jets are just one part of properly circulating and filtering your pool water.

Should Pool Return Jets Point Up Or Down?

There are a few things to consider when determining whether pool return jets should point up or down. One is the type of pool you have. If you have a above-ground pool, the jets will need to point down in order to create the circulation pattern needed to keep the water clean.

Another consideration is the size of your pool. If you have a small pool, the jet pressure may not be strong enough to push the water all the way to the other side if they are pointing up. Additionally, if you live in an area with a lot of wind, pointing the jets down will help prevent debris from being blown into your pool.

In general, it is recommended that pool return jets point down. This will ensure proper circulation and filtration of your pool water and help keep it clean and clear.

How Do I Adjust My Pool Returns?

If your pool’s returns are not properly adjusted, the water level in your pool can become too low or too high. By properly adjusting your pool’s returns, you can ensure that the water level in your pool is maintained at a safe and consistent level.There are two types of returns on a swimming pool: the main drain and the skimmer.

The main drain is located at the bottom of the pool and is responsible for draining water from the entire pool. The skimmer is located at the top of the pool and is responsible for removing debris from the surface of the water.To adjust your pool’s returns, you will need to first determine which type of return needs to be adjusted.

If yourpool has only one return, it will likely be the main drain. If yourpool has more than one return, you may need to adjust boththe main drain and one or more skimmers.

How Do You Position Pool Returns?

When it comes to pool returns, there are a few things you’ll want to keep in mind. First, you’ll want to make sure that the pool is level. This can be done by using a level or by eyeballing it.

Once the pool is level, you’ll want to mark out where you want the return line to be. This can be done with string or tape. Once you have your lines marked, you’ll want to dig a trench for the return line.

The trench should be about 6 inches wide and 18 inches deep.After the trench is dug, you’ll need to install the PVC pipe for the return line. The pipe should be glued together using PVC cement.

Make sure that the glue is rated for pools and that it’s compatible with your type of PVC pipe. Once the glue has set, you can fill in the trench around the pipe. When filling in the trench, make sure that there are no air pockets around the pipe.

These air pockets could cause leaks later on down the road.


If you have a pool, you know that the return eyeball is an important part of keeping your pool clean. But what do you do if your pool return eyeball is not working properly? Here are some tips on how to adjust pool return eyeballs.

First, check to make sure that the return eyeball is screwed in correctly. If it is not, unscrew it and screw it back in until it is tight.Next, check the O-ring around the return eyeball.

If it is damaged or missing, replace it with a new one.Finally, check the alignment of the return eyeball. It should be pointing straight down into the pool so that water can flow through it easily.

If it is not aligned properly, unscrew it and screw it back in until it is pointing in the right direction.

Home Advisor Blog

Home Advisor Blog is a reader-supported blog. This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.