1. Disconnect the pool pump and filter system from the Intex pool, then drain all of the water out. This can be done by removing any plugs at the bottom of your pool or by using a submersible sump pump to remove standing water.
2. Unhook any hoses connected to your Intex pool, including those for skimmers, drains, and vacuum lines if applicable.
Store these items away in a safe place until you’re ready to use them again next season.
3. Remove all ladders and other accessories that are attached to your Intex pool as well as any debris or leaves that may have accumulated over time inside it such as toys, inflatables etcetera .
4. If necessary , use a pressure washer hose with detergent on stubborn stains or algae build-up left behind after draining the water out of your Intex Pool .
Rinse off thoroughly afterwards with plain water but do not leave any soap residue behind
- Step 1: Drain the Pool: Use a garden hose to connect the Intex pool drain valve to an outlet, such as a sewer or another drainage source
- Turn on the water and allow it to completely empty out
- Step 2: Disassemble the Pool Structure: Take apart any additional pieces of your Intex pool structure, including ladders, pumps, filters and hoses
- Place them in a safe location where they won’t be damaged by weather conditions or animals
- Step 3: Clean Out Any Debris from The Pool Liner : After draining all of the water out of your pool liner, use a soft brush to remove any remaining debris from its walls
- This will help you prevent mold growth when it’s dry and also make sure that no dirt remains in your new liner if you choose to replace it with a new one later on
- Step 4: Let It Air Dry Completely : Once all debris has been removed from inside and outside of your Intex pool liner, leave it uncovered for several days so that air can circulate through and dry everything out completely
Intex Pool Storage Container
When it comes to keeping your pool supplies dry and organized, the Intex Pool Storage Container is an excellent choice. This heavy-duty storage container features a weather-resistant design that keeps contents safe from the elements and an easy access lid for quick organization of items. It also has four durable side pockets for extra space, adjustable straps for secure closure, and visible mesh netting so you can easily identify what’s inside.
With its strong construction and efficient design, this container is perfect for storing all your swimming essentials in one convenient location.
Container to Store above Ground Pool
When it comes to storing an above ground pool, the best option is to use a waterproof container. These containers come in different sizes and materials that can help protect your pool from environmental hazards such as UV rays, rain, snow, and wind. They also provide extra security for your investment by keeping animals and debris away from the pool when not in use.
With these containers you can easily store your above ground pool during the winter months or any other time of year when it won’t be used.
How to Fold Intex Rectangular Pool
Folding an Intex Rectangular Pool is a simple process that will help you save space for storage and transportation. To begin, make sure that the pool has been emptied of all water and debris before beginning to fold it up. Next, locate the valves located on each side of the pool – these are used to deflate the air chambers within the walls of your pool.
After opening them up, gently push down on each wall until all air has been released from inside. Finally, use your hands or a towel to gently fold inwards towards the center of your pool until it completely collapses.
Intex Pool Drain Adapter
The Intex Pool Drain Adapter is a must-have accessory for all owners of Intex pools. It allows you to safely and easily drain water from your pool without the need for manual draining or backwashing. The adapter attaches directly to any standard garden hose, making it simple to keep your pool clean and ready for use whenever you need it.
With an easy installation process and no additional tools required, this adapter is a great way to ensure that your swimming experience is always enjoyable!
How to Drain Intex Pool Without Adapter
Draining an Intex pool without an adapter can be done by first locating the drain plug at the bottom of the pool wall. Next, attach a garden hose to the drain plug and place it in a location where you want the water to flow away from your home or property. Make sure that this location is lower than your pool so that gravity will help pull out all of the standing water in your Intex pool.
Finally, open up the drain plug and watch as all of your unwanted water quickly exits through your attached garden hose.
How to Drain Intex Pool With Garden Hose
Draining an Intex pool with a garden hose is a straightforward process. First, attach one end of the garden hose to a nearby drainage system or have it run downhill so that water can easily flow out of the pool. Next, place the other end into your Intex pool and turn it on full blast until all of the water has been drained from the pool.
Lastly, remove any debris and dirt left behind in order to keep your Intex Pool clean and safe for use!
How to Take down Intex Pool Metal Frame
Taking down an Intex metal frame pool can be a challenging task, but by following the steps below you should be able to do it safely and efficiently. Firstly, you’ll need to completely empty any remaining water from the pool using a sump pump or garden hose. Once all of the water has been drained out, disconnect any hoses or pipes connected to the filter system if applicable.
Next, use a Phillips head screwdriver to unscrew all of the bolts that are holding the frame together at each joint. Lastly, carefully lift off each section of metal frame and take them apart – once they are fully disassembled store them in a safe place until ready for reassembly.
Intex Pool Storage Bag
The Intex Pool Storage Bag is an essential accessory for anyone with an above-ground swimming pool. This convenient storage bag allows users to store away their inflated pool and all of its accessories when it’s not in use, preventing them from cluttering up the yard or garage. Its large capacity ensures that even large pools can be stored away neatly, and its durable construction makes sure that everything inside will stay safe until you’re ready to use it again.
Credit: www.intexpoolsdirect.com
How Do I Get Water Out of My Intex Pool?
To get water out of an Intex pool, you will need to:
1. Connect a garden hose to the drain plug in the pool wall and place the other end into a drainage area.
2. Turn on the pump and allow it to run until all of the water has been removed from your Intex pool.
3. Disconnect the hose from both ends once this is done and store it properly for future use.
After these steps have been completed, your Intex pool should be completely drained of any remaining water.
How Do You Dry an Above-Ground Pool for Storage?
To dry an above-ground pool for storage, follow these steps:
• Disconnect hoses and pumps.
• Remove ladder and other equipment.
• Use a shop vacuum to remove any remaining water from the pool walls or bottom.
• Allow it to air dry completely before storing away.
Storing an above-ground pool is necessary if you don’t plan on using it all winter long.
Taking extra care to make sure the pool is entirely dried out first will help ensure that no mold or mildew accumulate during its time in storage.
How Do I Drain My Intex Above-Ground Pool?
Drain the Intex above-ground pool by following these steps:
• Turn off the pump.
• Disconnect the hoses from the filter system and remove from pool.
• Position a garden hose near an appropriate drain and attach it to the drain plug assembly on your pool wall.
• Open the valve at bottom of pool, allowing water to flow out until desired level is reached.
Finally, close valve when done draining water and reattach filter hoses for future use.
Can I Leave Water in My Intex Pool?
Yes, you can leave water in your Intex pool. It is recommended to maintain a minimum of 12 inches of water above the lowest point on the liner when not in use. Here are some tips for maintaining an Intex pool:
• Maintain proper pH level and chlorine levels with regular testing
• Keep leaves and other debris out of the pool
• Cover your Intex pool when not in use
• Clean filter regularly
Following these tips will help ensure your Intex pool remains safe and clean while you’re away.
How to repair a leaking above ground pool
Conclusion
In conclusion, drying out an Intex pool is a relatively straightforward process that can be done in a few simple steps. First, drain the water from the pool and disconnect all accessories such as hoses and filters. Then, remove any debris from the bottom of the pool using a vacuum or skimmer net and use towels to absorb any remaining moisture.
Finally, allow your Intex pool to air dry for 48 hours before storing it away until next season. Following these tips should help ensure that your Intex pool remains in great condition year-round!