How to Put River Rock around above Ground Pool

1. Clear the area around your above ground pool and remove any existing grass, weeds or other debris. 2. Measure out an area at least two feet away from the edge of your pool. This will be where you will lay down your river rocks.

3. Place a landscaping fabric over this measured area to prevent weeds and grass from growing up through the river rocks once they are in place. 4. Dig a shallow trench along the edge of your swimming pool so that you can rest the edging material into it for stability when placing the river rock around it; make sure that it is level with soil as needed before setting into place with stakes if necessary for extra security/stability if needed . 5. Fill this trench with sand until level, then begin laying down river rocks in desired pattern taking care to fill any gaps between them as you go along; use larger stones towards outside edges and smaller ones closer to inside of circumference of pool wall as well as using flat stones on top of each other when necessary for better stability .

6 Spread some landscape adhesive to secure stones further together once all have been laid in place; let dry completely before stepping onto or playing on surface near by poolside..

  • Step 1: Measure the area around the pool and determine how much river rock you will need
  • You can use a tape measure to get an accurate measurement
  • Step 2: Prepare the soil for installation by removing any existing stones, weeds, and debris from the space where you plan to install your river rocks
  • Make sure that all dirt is leveled out before continuing with the project
  • Step 3: Lay down a layer of landscape fabric over the prepared soil in order to prevent weeds from growing through your river rock later on
  • Secure it in place using ground stakes or heavy rocks if necessary
  • Step 4: Spread out a thin layer of sand over top of the landscape fabric in order to create an even surface for your river rocks to be placed upon it
  • This step helps ensure that everything looks uniform when finished with installation process
  • Step 5: Begin placing your river rock onto the sand-covered landscape fabric starting at one corner and working outward until you reach desired coverage area near above-ground swimming pool’s edge line
  • Be sure not to fill up too high as this could cause overflow when filled with water!Step 6: Once all of your desired coverage has been achieved, tamp down each section lightly with a tamper or shovel handle so that they are firmly set into place
  • Be careful not to disturb landscaping fabric underneath while doing this as well!Step 7 : Finish off project by filling any gaps between stones using smaller pieces from leftover bagged material if needed – this will help keep everything looking neat & tidy once complete!

How to Make a Border around an above Ground Pool

Creating a border around your above ground pool is an easy way to add style and definition to the area. You can use landscaping materials such as pavers, stones, or bricks to create a unique look that will compliment your home’s exterior. Before beginning work on this project, be sure you have all of the right supplies – including sand and gravel for leveling the base – and take measurements of your pool so you know how much material to purchase.

Additionally, it’s important to make sure that whatever material you choose is safe for contact with water and won’t cause any damage or discoloration over time. With careful planning and attention-to-detail, you can easily transform your outdoor swimming space into one that looks professionally designed!

Best Stone for around above Ground Pool

When installing an above ground pool, the best stone to use around the perimeter is a sturdy and long lasting material such as flagstone or slate. Flagstone is available in a variety of colors and textures, making it easy to create a visually appealing landscape that complements your swimming pool. Slate can also be used around above ground pools since its natural properties make it waterproof and resistant to damage from moisture exposure.

Both materials are durable enough to withstand harsh weather conditions while adding aesthetic value to your outdoor space.

How to Put Rocks around an above Ground Pool

Putting rocks around an above ground pool can be a great way to make your backyard feel more natural and inviting. To do it properly, you’ll need to start with a layer of sand or pea gravel in order to create a level base for the rocks. Then, you’ll want to choose stones that fit the aesthetic of your yard and are large enough so they don’t shift when stepped on.

Finally, use landscape adhesive or mortar mix between each stone to keep them in place before adding additional layers of soil if desired.

Can You Put Stone around above Ground Pool

Yes, you can put stone around an above ground pool. It adds a decorative touch and helps to keep the pool liner in place while providing a durable edge for your pool. Stone edging also serves as an attractive border and is easy to install with minimal effort or cost.

Make sure to use stones that are rated for outdoor use and check with local building codes before installing it around your above ground pool.

How to Put River Rock around above Ground Pool


How Do I Keep Rocks around My above Ground Pool?

To keep rocks around an above ground pool, use the following steps:• Choose a type of rock suitable for outdoor use. Consider factors such as size, weight and water absorption levels.

• Use a shovel to create circular or rectangular depressions in the soil surrounding the pool area. • Fill each hole with sand and then place rocks into each hole, packing them together tightly with your hands or a mallet. • Cover any gaps between the rocks with pea gravel or mulch to prevent weeds from growing near the pool area.

• Make sure the top layer of stones is even and level with one another for an attractive look that also serves as an effective barrier around your above ground pool.By taking these steps you can ensure that your above ground pool is surrounded by attractive yet sturdy rocks that will last through all seasons.

What is the Best Rock to Put around an above Ground Pool?

The best rock to put around an above ground pool is one that won’t erode or deteriorate over time. Here are some of the best options: • River Rock: Smooth, rounded stones with a variety of colors and sizes.

• Limestone: A more solid stone material with subtle variations in color and texture. • Bluestone Pavers: Durable natural stone pavers available in various shapes and sizes. No matter which option you choose, it’s important to make sure it won’t leach alkalinity into the water or cause staining on your pool liner.

How Do You Landscape Rocks around a Pool?

A well-placed landscape rock can add beauty and structure to a pool. Here are some tips for landscaping rocks around a pool:• Select the right type of rock – Choose rocks that won’t erode or stain easily, such as quartzite or flagstone.

• Place strategically – Position the rocks to create an eye-catching design while still allowing easy access to the pool’s maintenance areas. • Use weed barriers – Install a fabric material underneath the rocks to prevent weeds from growing between them. • Add color accents – Incorporate colorful stones like river pebbles or sea glass into your design for added texture and contrast.

With these strategies in mind, you’ll be able to create an attractive landscape around your pool that will last for years to come!

Should You Put Rock Or Mulch around above Ground Pool?

Rock or mulch can both be used to landscape around an above ground pool. The choice of material should depend on the desired aesthetic and budget.Advantages of using rock:

* Durable and long-lasting * Low maintenance * Can create a natural look

Disadvantages of using rock: * Expensive compared to mulchAdvantages of using mulch:

* Inexpensive and readily available

Pool installation & detailing around with river rock


In conclusion, river rock around an above ground pool can be a great way to add beauty and privacy to your backyard. It is important to properly plan out the area before beginning, as well as take into account any potential landscaping issues that could arise. Additionally, it may be necessary to dig up a portion of the ground in order for the rocks to be placed at desired depths and angles.

With some planning and effort, you can have a beautiful outdoor oasis with river rock surrounding your above ground pool!

Home Advisor Blog

Home Advisor Blog is a reader-supported blog. This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.