Oatey shower drain covers can be removed by unscrewing the screws that hold it in place. Once the screws are removed, the cover can be lifted off of the drain. If the cover is difficult to remove, a putty knife can be used to help pry it off.
- Unscrew the Oatey shower drain cover using a screwdriver
- Lift up the Oatey shower drain cover and remove it from the drain
- Use a plunger to clear any debris that may be blocking the drain
- Rinse off the Oatey shower drain cover and replace it on the drain
How to remove a shower drain cover / cap that doesn’t have screws. Shower drain is clogged.
How Do You Lift a Shower Drain Cover Without Tool?
If your shower drain cover is screwed in place, you will need a screwdriver to remove it. Place the tip of the screwdriver into one of the slots on the edge of the drain cover and twist counterclockwise until the screw loosens. You may need to use a little force to get it started.
Once the screw is loose, remove it and set it aside.
You should now be able to lift the drain cover off of the drain itself. If there is any build-up of hair or soap scum around the edges of the drain, you can use a putty knife or old toothbrush to clean it away before replacing the cover.
How Do I Unclog My Oatey Shower Drain?
If your Oatey shower drain is clogged, there are a few things you can do to try and unclog it. First, you can try using a plunger. If that doesn’t work, you can try using a drain snake.
If neither of those work, you may need to call a plumber.
How Do You Remove a Shower Drain Drain Cap?
Assuming you are referring to a standard shower drain, the process is actually quite simple. All you need is a screwdriver (preferably Phillips head) and a wrench.
First, locate the screws holding the drain cover in place.
There are typically two of them, one on each side of the center drain opening. Use your screwdriver to loosen and remove these screws. Once they are removed, the cover should come right off.
If it is stuck or seems like it might break, you can try using a putty knife to pry it up gently.
Once the cover is off, you will see the drain strainer with a hole in the center. This hole leads down to the drain pipe that carries water away from your shower.
In order to remove this strainer and access the pipe, there will be another set of screws holding it in place. Again, use your screwdriver to loosen and remove these screws. The strainer should then come free easily.
If there is any buildup or debris around the rim of the drain pipe, use a cloth or brush to clean it away before proceeding further. Now take your wrench and unscrew the nut that holds the entire assembly together at the bottom of the drainpipe. With this nut loosened (but not completely removed), you should be able to pull out both The stopper itself may be attached to this nut with a chain – if so, detach it now so that you can remove everything more easily later on).
Finally, pull out The whole assembly – stopper included – should come out relatively easily at this point,.
Are Shower Drain Covers Removable?
Shower drain covers are usually removable, although it depends on the type of cover and how it is attached. If the cover is screwed on, it will be easy to remove. However, if the cover is glued or welded on, it may be more difficult to remove.
Credit: womenyoushouldknow.net
Remove Shower Drain Cover No Screws
If your shower drain cover is held in place with screws, then removing it is a relatively easy task. However, if your drain cover is not secured with screws, then you may need to use a little bit of force to remove it. Start by inserting a flathead screwdriver or a putty knife into the space between the drain cover and the shower floor.
Then, twist or pry the tool to loosen the drain cover. Once it is loose, you should be able to lift it off of the drain. If you are having trouble removing the drain cover, try using a plunger to create suction and help loosen it.
Conclusion
If you need to remove the Oatey shower drain cover, there are a few things you need to know. First, you will need to locate the screws that hold the drain cover in place. There are usually two screws, one on each side of the drain.
Use a screwdriver to loosen and remove these screws.
Once the screws are removed, you should be able to lift off the drain cover. If it is stuck, gently pry it up with a flathead screwdriver or other tool.
Be careful not to damage the surrounding area as you do this.
With the cover off, you can now clean out any debris that may be blocking the drain. Once you have done this, replace the cover and screw it back into place.
