How to Turn on Shower Diverter

To turn on a shower diverter, first locate the valve handle and make sure it is in the off position. Next, place your hand on the wall-mounted faucet to confirm that no water is coming out of it. Then, with your other hand, pull up on the diverter knob or lever located near the top of your shower head.

You should feel resistance as you pull up on it; this indicates that you are engaging the diverter mechanism. Finally, turn on your main hot and cold water valves until desired temperature is reached. Be sure not to adjust any additional knobs or levers near these valves as doing so can cause damage to them or even potentially injure yourself!

  • Locate the diverter valve handle on the wall of your shower – This can typically be found at about waist level near where the water enters the shower
  • Unscrew and remove any covers or plates if necessary – Depending on your model, you may need to unscrew a cover plate before being able to access the diverter valve handle
  • Turn counterclockwise until it stops – To turn on the diverter, rotate it clockwise in a vertical position until it stops moving and is firmly locked in place
  • You should now hear water running from both parts of your shower (this will depend on what type of fixture you have)
  • 4 Test for proper function – Once turned fully, test for proper functionality by turning off one side of your shower and then assessing that only one side has shut off: this shows that you’ve successfully diverted water from one part to another!
How to Turn on Shower Diverter


How Does the Shower Diverter Work?

The shower diverter is a device used to control the flow of water between multiple outlets. It works by either redirecting all of the water to one outlet or dividing it evenly among several outlets. – The diverter has two valves, an intake valve and an output valve.

– When the diverter is turned off the input valve closes, stopping water from entering. – Turning the handle will cause one side of the output valve to open, allowing pressurized water into that side of the pipe network. – Depending on how far you turn it determines which outlet gets more pressure and therefore more water flow than other outlets in line with it.

How Do You Turn on a Shower Switch?

To turn on a shower switch, follow these steps: – Locate the switch. It will typically be located near the faucet handle or alongside the wall.

– Flip the lever in an upward direction to activate it and start water flow. – Test your work by turning on the faucet handle; if you hear running water, then you’ve successfully activated your shower switch!

Why is My Shower Diverter Hard to Turn?

Your shower diverter is hard to turn due to a few reasons: • Build-up of sediment in the valve stem: If mineral deposits or other particles have built up on the stem, it can make turning difficult. • Corrosion in the valve stem: Rust and corrosion are common problems that can cause sticking.

• Worn out parts or improper installation: Over time, internal components may wear out or be installed incorrectly which leads to difficulty when turning. To address these issues, you should inspect and clean your shower diverter regularly; this will help keep it functioning properly. If cleaning doesn’t work, consider replacing the entire unit with a new one for best results.

Why is My Shower Diverter Not Working?

A shower diverter is a mechanism used to direct the flow of water from the tub spout to either the shower head or tub faucet. If your shower diverter isn’t working, there are several potential causes: • The washer in the valve stem may be worn and need replacing

• Debris may be blocking it, preventing proper operation • The valve seat inside the wall could be corroded or have mineral buildup To diagnose and fix this issue, consult with a plumber as soon as possible.

Turning Shower Diverter On

How to Turn on Different Types of Showers

Turning on different types of showers is easy, provided you understand the basics. For traditional showers with a single-handle valve, push down to turn the water on and adjust the temperature by turning the handle left or right. Thermostatic showers require a two-handle system; one for hot and one for cold.

Push both handles in at once to initiate water flow, then twist them until you reach your desired temperature setting. Digital shower systems provide an even greater level of control when it comes to managing temperature and flow rate; simply enter your preferences into their touchscreen displays.

How to Turn on a Shower With One Knob

Turning on a shower with one knob requires two simple steps. First, turn the valve clockwise until it stops – this is typically done by hand but may require a wrench. Once the valve has been fully turned, you can then adjust the temperature of your shower using the same knob.

To make it hotter, turn it to the right and for colder water, turn it left. After adjusting to your desired temperature, you’re all set to enjoy a nice hot or cold shower!

How to Turn on Shower Knob

To turn on a shower knob, make sure the handle is in the off position and then rotate it clockwise. If you encounter any resistance while turning it, that could indicate something is wrong with your water pressure or plumbing system. Make sure to check both hot and cold knobs as well, since they may need to be turned separately.

Once you hear running water, adjust the temperature of your shower by rotating both handles until it reaches your desired warmth.

How to Turn on a Shower Without Pull Tab

If your shower lacks a pull tab and you’re not sure how to turn it on, don’t worry – there is an easy solution! You can easily activate the water flow by pressing down on the diverter valve typically found behind the tub spout. Simply press down firmly until you hear a click, which indicates that the water is now flowing from the shower head.

This method should work for most showers without a pull tab so you can enjoy your hot shower with ease!

How to Turn on Shower With Pull Tab

To turn on the shower with a pull tab, start by locating the pull tab. It is typically located at the top of the faucet or near the handle. Once you have located it, use your thumb to slide it up and turn on your shower.

If there are multiple tabs that need to be pulled in order for water to come out, make sure all of them are pulled before turning on your shower.

How to Turn on a Shower With Two Knobs

Turning on a shower with two knobs is relatively simple. First, check to make sure the cold water knob is turned all the way off and then turn the hot water knob counterclockwise until you feel a slight resistance. After that, slowly turn both of the knobs in a clockwise direction at the same time until you reach your desired temperature.

Make sure not to turn them too far or else you could scald yourself!

Can’T Find Shower Diverter

If you are having trouble finding a shower diverter, the best place to start is by checking your local hardware store. Most stores will carry a selection of different types of shower diverters that can be used for both wall-mounted and ceiling-mounted showers. Additionally, if you know what type of diverter you need, then searching online can provide even more options from retailers who specialize in plumbing supplies.

Finally, it’s always wise to double check with an expert at your local hardware store before purchasing a shower diverter so that you get exactly the right product for your needs!

How to Turn on Shower With One Knob Delta

To turn on a Delta shower with one knob, first make sure the diverter is in the up position. Then, turn the handle counterclockwise until you feel it click into place. This should be enough to open the water flow and allow hot and cold water to mix.

If necessary, further adjust the temperature by turning the knob clockwise or counterclockwise until desired warmth is achieved.


Overall, fixing a shower diverter is not difficult if you have the right tools and know-how. With just a few simple steps, you can easily fix your own shower diverter and save yourself from having to call in an expensive plumber. While it may require some patience and elbow grease, turning on your shower diverter is definitely worth it for both the time saved and money saved.

Home Advisor Blog

Home Advisor Blog is a reader-supported blog. This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.