Pentair Easy Touch No Comm is a pool automation system designed to make controlling your pool’s temperature and lighting easier. This system allows users to control their pool settings remotely using an app or web-based interface. It has preset settings that allow you to quickly adjust the water temperature, lights, and other features in one simple step without having to worry about complicated programming.
Additionally, it comes equipped with a wide range of safety features including freeze protection and adjustable timeouts for heater operation. The no-comm feature ensures that all data is stored locally on the device rather than sending out any information over the internet which makes it more secure if someone were trying to access your systems remotely.
The Pentair Easy Touch No Comm is an innovative, easy-to-use device that eliminates the need for hard wiring to control your pool and spa systems. With this device you can remotely turn on lights, heaters, pumps and more with just a touch of a button. You can even control multiple devices at once from one central location!
The Easy Touch No Comm also offers superior energy efficiency due to its low power consumption design and optional solar panel connections for maximum savings. Plus, it’s designed to last up to 10 years in extreme weather conditions so you never have to worry about replacing parts or upgrading your system again.
Pentair Intelliflo No Comm
Pentair Intelliflo No Comm is a great product for those looking to reduce their pool’s energy costs. This product uses wireless technology to communicate with the Pentair IntelliFlo pump and deliver precise performance, all without having to run any wiring through the wall or ceiling. It also offers an easy-to-use interface that allows you to monitor your pool’s performance from anywhere in the world via an app on your smartphone or tablet.
With its advanced features, Pentair Intelliflo No Comm can help save up to 90% of energy costs compared to traditional pumps!
Pentair Easy Touch Troubleshooting
If you are having trouble with your Pentair Easy Touch pool control system, there are steps you can take to troubleshoot and resolve the issue. First, check the power supply and make sure it is connected properly. Next, verify that all of the circuit breakers are in the “on” position.
You may also need to reset any GFCI outlets that might be tripped. If these steps do not help solve the problem, contact a qualified technician for additional assistance.
Pentair Easy Touch Reset Button
The Pentair Easy Touch Reset Button is a great feature that helps to reset the system when it malfunctions. This button can be found on the control panel of your pool’s filter or pump system and, when pressed, will restart the entire system and help get it back up and running again. It’s also useful in case there are any irregularities with your pool’s water pressure or temperature settings, as pressing this button will allow you to adjust them quickly without having to manually do so.
Pentair Easy Touch No Display
The Pentair Easy Touch No Display is an automated pool and spa system that allows you to control the temperature, cleaning cycles, water chemistry and other features of your pool without having to manually monitor them. It’s easy to install and operate, with no display panel or keyboard required. Its intuitive menu-driven interface makes it simple to use, while its advanced technology enables precise temperature regulation for maximum efficiency.
With the Pentair Easy Touch No Display, you can enjoy worry-free pool care all season long!
Pentair Easy Touch Not Turning on Pump
If your Pentair Easy Touch pool control system is not turning on the pump, it could be caused by a number of issues. The most common issue is that the power supply has been interrupted or disconnected to the EasyTouch Control System. You should also check for any blown fuses and replace them if necessary.
Additionally, make sure all wires are properly connected and secure in their terminals. If these steps do not resolve your issue, you may need to call an electrician or contact Pentair directly for further assistance.
How Do I Reset My Pentair Easy Touch?
Resetting your Pentair Easy Touch is a simple process:
• Turn off the breaker for at least 10 seconds.
• Press and hold both the Up and Down arrow buttons on the control panel simultaneously until all lights flash once.
• Release the buttons, then press any button to confirm reset. Your Easy Touch system should now be back to its original factory settings.
What is Service Mode on Pentair Easytouch Control System?
Service mode on Pentair EasyTouch control system is a diagnostic tool used by pool professionals to troubleshoot and diagnose problems. It provides access to the various settings of the system, such as circuit board information, valve positions, pump speed settings and heater parameters.
Benefits of Service Mode:
• Allows technicians to quickly identify issues with the automation system • Provides detailed diagnostics for more complex repairs
Can I Control My Pentair Easy Touch With My Phone?
Yes, you can control your Pentair Easy Touch with your phone. Here are the steps:
• Download the EasyTouch app for iOS or Android
• Connect your device to a wireless router and power on the system • Follow the instructions in the app and get started • Use it to manage all of your settings
The intuitive design of this app makes it easy to operate, allowing you to adjust pool temperature and sanitizer levels from any location using your mobile device. Additionally, you can monitor water features like fountains, lights and waterfalls remotely.
How Do I Connect to Screenlogic Wifi?
Connecting to Screenlogic WIFI is easy:
• Turn on your device and the ScreenLogic interface.
• Access the Wi-Fi settings of your device.
• Look for your network name (SSID) under “Available Networks” list. • Select it and enter password when prompted. • The connection will be established once you accept the terms & conditions of usage as applicable.
Once connected, you can access the web-based control panel or app to manage pool activities remotely from any location with internet access.
Getting easy touch remote to sync when no com is displayed
Overall, the Pentair Easy Touch No Comm is a great option for anyone looking to upgrade their pool automation system. It offers an intuitive interface that makes it easy to control and monitor your pool from anywhere in the world. The lack of communication requirements also makes it one of the most cost-effective solutions available on the market today.
With its wide range of features, this system provides users with everything they need to make their pool management easier than ever before.