If your Pentair Easy Touch is not communicating with your pool pump, there are a few things you can check. First, make sure that the power supply to the Easy Touch is turned on and that the fuse is not blown. Next, check the communications cable between the Easy Touch and the pump to make sure it is securely connected and free of any cuts or breaks.
Finally, check that the settings on the Easy Touch are configured correctly for your particular pump model. If all of these things are in order and you are still having trouble, you may need to replace the communications board in your Pentair Easy Touch.
Getting easy touch remote to sync when no com is displayed
If you have a Pentair Easy Touch pool controller and your pump is not communicating with it, there are a few things you can do to troubleshoot the issue. First, check to make sure that the wires between the two units are properly connected. If they are, then check to see if the power supply to the pump is turned on.
If it is, then try resetting both the controller and the pump. If that doesn’t work, then you may need to replace either the controller or the pump.
Pentair Easy Touch Troubleshooting
If you’re having trouble with your Pentair Easy Touch system, there are a few things you can do to troubleshoot the problem. First, check to make sure that all of the wiring is correct and that there are no loose connections. Next, check the fuse box to see if any of the fuses have blown.
If they have, replace them with new ones. Finally, check the control panel to see if there are any error messages being displayed. If so, follow the instructions on the screen to resolve the issue.
If you’re still having problems, contact Pentair customer service for assistance.
Pentair Easy Touch Reset Button
As the name suggests, the Easy Touch Reset Button from Pentair is designed to make it easy for you to reset your pool’s filtration system. This button is located on the front of the filtration control panel, making it easily accessible. Simply depress the button and hold it for three seconds, and your system will be reset.
Pentair Easy Touch Not Following Schedule
If you have a Pentair Easy Touch pool control system, you may have noticed that it’s not following the schedule that you set up. There are a few possible reasons for this:
1. The time on the control panel may be set incorrectly.
Check to make sure that the correct time is displayed and adjust it if necessary. 2. The schedule may have been changed inadvertently. To check this, go to the “Schedule” menu and see if any changes have been made.
If so, simply select the “Restore Default Schedule” option to reset it back to the way it was originally configured. 3. There could be a problem with the power supply to the control panel. If there is an interruption in power, even for a brief moment, it can cause the schedule to reset itself.
Check all of the connections to make sure they’re tight and secure and then try restarting the control panel. If that doesn’t work, you may need to replace the batteries in the unit.
Pentair Easy Touch No Comm
If you’re looking for a pool control system that is both easy to use and reliable, then you should definitely consider the Pentair Easy Touch No Comm. This system offers many features that make it ideal for both residential and commercial pools, including the ability to control all aspects of your pool from a single touchscreen panel. It also includes a wireless remote, so you can control your pool from anywhere within range.
Pentair Remote Not Communicating
If you have a Pentair pool and spa control system, you may have experienced an issue where the remote will not communicate with the control panel. There are a few things that could be causing this problem, so we’ve compiled a list of troubleshooting tips to help you get your remote back up and running.
First, check the batteries in your remote.
If they are low or need to be replaced, that could be the reason why your remote is not communicating with the control panel. Next, take a look at the antenna on your remote. Make sure it is fully extended and in good condition – if it is bent or broken, that could also be causing communication issues.
Finally, check the signal strength between your remote and control panel. If there are any obstructions between them (such as walls), that could be interfering with the signal and preventing communication. If you’ve tried all of these troubleshooting tips and you’re still having problems getting your Pentair remote to communicate with the control panel, please contact our customer service team for assistance.
How Do I Reset My Easytouch Pentair?
If your Easytouch Pentair system is not working properly, you may need to reset it. To do this, first make sure that the power is turned off. Then, locate the reset button on the control panel.
Press and hold the reset button for three seconds. The system should now be reset and ready to use.
How Do I Reset My Pentair Water Pump?
If you need to reset your Pentair water pump, there are a few things you will need to do. First, locate the circuit breaker box and turn off the power to the pump. Next, find the pressure switch on the side of the pump and flip it to the “OFF” position.
Finally, locate the reset button on the control panel and press it in for three seconds. Once you have done all of this, you should be able to restart your water pump and it will be working properly again.
How Do I Reset My Pentair Intelliflo Variable Speed Pump?
If your Pentair Intelliflo variable speed pump is not working properly, you may need to reset it. To do this, follow these steps:
1. Turn off the power to the pump at the breaker box.
2. Remove the four screws that hold the front cover of the pump in place. 3. Lift off the front cover and locate the reset button on the control board. It will be clearly marked.
4. Press and hold the reset button for about three seconds, then release it. The pump should now be reset and ready to use.
How Do I Prime My Pentair Pump?
If your Pentair pool pump isn’t working properly, one of the first things you should check is whether or not the pump is primed. To do this, you’ll need to open up the pump and check the water level inside. If there isn’t enough water, then the pump won’t be able to function properly.
Here’s a step-by-step guide on how to prime your Pentair pool pump: 1. Start by disconnecting the power to the pump. This is an important safety precaution that should never be ignored.
2. Once the power is off, take off the lid to the pump so you can access the internals. 3. Check the water level inside the pump. If it’s below where it needs to be, then you’ll need to add more water until it reaches the correct level.
4. Once the water level is correct, put everything back together and turn on the power to the pump. The pentair pool pump should now be primed and ready to use!
If you have a Pentair Easy Touch Controller and your pool pump is not responding to commands from the controller, there are a few things you can check to troubleshoot the issue. First, make sure that the power supply to both the controller and the pump is turned on. Next, check that all of the wiring between the controller and the pump is securely connected.
Finally, if you are using an external relay to control the pump, make sure that it is powered on and properly configured. If none of these steps resolve the issue, you may need to replace either the controller or the pump.