Pool is Higher on One Side

If the pool water level is higher on one side, it could be caused by a variety of factors. First, check to see if there are any leaks in the pool or equipment (pumps, filters). If no leaks are found then check for clogs in the plumbing.

A clog can cause an imbalance and create suction on one side which will draw more water from that area. You may need to backwash your filter to get rid of debris buildup. It is also possible that something is blocking the skimmer intake causing an uneven flow of water circulating into the pool.

Check for items like leaves or branches that may have gotten stuck inside the skimmer basket or pipe leading up to it. Make sure all returns are functioning properly and not blocked as well as inspect any valves for proper flow control settings.

If you’ve ever been to a pool, you know that the water can sometimes be higher on one side than the other. This is due to something called “hydraulic pressure,” which occurs when more water enters one side of the pool than it does the other. The imbalance in pressure causes water from the deeper end of the pool to move towards the shallow end, resulting in uneven levels.

Fortunately, there are ways to balance out these imbalances and keep your pool looking its best!

How to Fix an Unlevel Inground Pool

If your inground pool has become unlevel, the best and most permanent fix involves excavating around the edge of the pool, placing a gravel foundation, then backfilling with sand. A hydraulic jacking system is used to lift and level the pool walls and floor before realigning them using braces or other support structures. Once everything is in place, new coping stones are laid on top of the sand before filling up with water again.

This approach will ensure that your inground pool remains properly leveled for years to come!

Above Ground Pool Sinking on One Side

Above ground pools are typically made of metal and plastic components that must be properly installed in order to ensure their stability. If the pool is not adequately leveled, or the soil underneath it begins to settle, it can cause one side of the above ground pool to sink. To remedy this issue, you will need to add more support under the affected side with sandbags or other materials.

Additionally, you should check for any cracks in the walls and replace any damaged parts if necessary.

Inground Pool Sinking on One Side

An inground pool sinking on one side can be a serious issue and should not be ignored. It is important to identify the cause of the problem in order to make sure it does not become worse over time. Common causes of an inground pool settling on one side include poor soil compaction, improper drainage, or inadequate backfill materials used during installation.

If you suspect your pool may have sunken on one side, contact a professional for further investigation and assistance with repairs.

Can You Level an above Ground Pool With Water in It

Yes, you can level an above ground pool with water in it if necessary. However, the amount of water should be reduced to a manageable level before attempting this task. This will prevent any excessive shifting or displacement of the pool’s structure when adjusting its position and help ensure that your pool is leveled properly without causing any damage to the sides or bottom of the pool.

What Happens If Your Pool is Uneven

If your pool has an uneven surface, it can be dangerous for swimmers and may also lead to water loss. An uneven pool surface can cause the pool liner or walls to become damaged, resulting in expensive repairs. Additionally, if the water is not evenly distributed throughout the entire pool area, it can cause structural issues such as cracking and buckling of tiles or coping stones.

Therefore, it’s important to ensure that your pool is even before filling with water.

Pool is Higher on One Side

Credit: www.h2ouse.org

How Do You Fix an Unlevel Pool Without Draining It?

There are several ways to fix an unlevel pool without draining it. • Install a channel drain system around the perimeter of your pool, which will help redistribute water and level out the surface. • Use a submersible pump to move water from one end of the pool to another in order to even out any differences in depth.

• Place foam blocks or sandbags under the legs of furniture and other items placed near the edge of the pool in order to temporarily raise it up or lower it down until it is level again. • Utilize a telescopic pole with a weighted line attached at its end for precision measurements when trying to adjust small areas that need leveling. These are all viable options for fixing an unlevel pool without having to go through the hassle of completely draining it each time adjustments need to be made.

How Many Inches Can a Pool Be Unlevel?

A pool can be up to 1/4 inch unlevel. This is the maximum amount that should be tolerated for a safe and level swimming environment. Reasons for this include:

• Preventing water from spilling over one side of the pool • Ensuring the filter works correctly • Avoiding areas of standing water, where bacteria could form

For any unevenness greater than 1/4 inch, there should be corrective action taken in order to even out the pool surface.

How Do I Fix the Low Side of My Pool?

To fix the low side of a pool, there are several steps you can take: • Check for leaks. Look around the edges of your pool where the water level has dropped and observe if any water is leaking out.

If so, patch up the holes with an epoxy or silicone sealant. • Adjust your filter system. Make sure all valves and settings on your filter pump are set correctly to ensure proper circulation in your pool.

This will help keep chemicals balanced and prevent stagnation which could cause further damage to the lining of your pool as well as encourage algae growth. • Add more water to make up for lost levels due to evaporation or splashing outside of the pool area during use by swimmers. Be sure to test pH levels regularly and maintain accurate chemical readings while doing this step in order not to impact other areas such as safety issues due to incorrect pH balance resulting from over-filling with fresh tap water!

These simple steps will help restore normalcy in regards to low sides in pools quickly and easily without having too much disruption in usage or enjoyment!

How Do You Level an Uneven Pool?

Leveling an uneven pool can be tricky. Here is a step-by-step guide to get it done: • Check the sides of your pool for any discrepancies in height.

• Measure the deep and shallow ends using a straight edge or leveler. • Mark those depths on both ends with spray paint that won’t damage the surface of your pool when removed. • Dig up soil around edges until they are even, making sure to keep depth marks consistent.

• Fill in low spots with sand and tamp down firmly with a flat board or tamper tool to create an even surface. • Re-check levels before adding water back into the pool so you don’t end up needing to do more work!

How to Fix an Unlevel Above Ground Pool


This blog post has shown us that there can be a number of different causes when it comes to why your swimming pool is higher on one side. From shifts in the ground, to plumbing problems, and even structural issues; all of these possible culprits need to be investigated further before you can determine what’s causing the issue. If needed, consult a professional or technician who specializes in pools and spas for advice and guidance on how best to proceed with repairs or maintenance.

With proper identification of the problem and appropriate action taken, you will have your level pool back up and running again in no time!

Home Advisor Blog

Home Advisor Blog is a reader-supported blog. This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Sitemap: https://homeadvisorblog.com/sitemap_index.xml