ScreenLogic is a web-based system controller that allows you to control your pool, spa and backyard environment from anywhere in the world. It works with compatible systems of Pentair Pool Equipment such as IntelliTouch, EasyTouch and SunTouch controllers. The ScreenLogic system provides remote access via an internet browser or mobile device to operate the lights, water temperature, pumps, filters and other features of their pool equipment through its user interface.
With this technology you can monitor your swimming pool anytime from any location while also having peace of mind that there will be no risk of accidentally leaving something running when not needed. Furthermore it is also possible to set custom programs for specific times so users don’t have to worry about manually starting and stopping devices at certain times throughout the day.
Screenlogic System Controller is a powerful and efficient tool for controlling your swimming pool or spa from anywhere. It provides you with real-time control of filtration, heating, lighting, cleaning cycles and other features. With its intuitive user interface and easy to use search feature, Screenlogic makes finding the right settings easier than ever before.
Whether you’re looking to make quick adjustments on the go or deep dive into detailed settings changes, Screenlogic has everything you need in one convenient place.
Pentair Screenlogic Not Connecting Locally
If you’re having trouble connecting your Pentair ScreenLogic system to a local network, the first thing to check is your internet connection. Make sure that your router and modem are properly connected and functioning correctly. Additionally, verify that the IP address settings on both devices match each other as this can prevent them from communicating with one another.
If these steps don’t help, contact your local service provider for further assistance.
Pentair Screenlogic Will Not Connect Remotely
If you are having trouble connecting to your Pentair Screenlogic pool automation system remotely, the most likely cause is that your router or local network settings are blocking access. To ensure a successful connection to your device, make sure that port 8081 is open on any routers or firewalls between you and the controller. Additionally, be aware of any security software such as antivirus programs which may also block connections.
If all else fails, contact Pentair technical support for further assistance in troubleshooting and resolving the issue.
Pentair Screenlogic Waiting for Wifi
Pentair ScreenLogic is an innovative pool and spa automation system that allows you to remotely control your pool or spa from anywhere in the world. The ScreenLogic interface works with select IntelliFlo, IntelliPro, Eco Select and Max-E-Therm pumps and can be controlled using any web enabled device such as a computer, smartphone or tablet. However, if you are connecting your Pentair ScreenLogic system to a Wi-Fi network for the first time, it may take up to 10 minutes for the connection process to complete before it will become operational.
Screenlogic Config
Screenlogic Config is a software program developed by Pentair that provides an easy way to control and monitor your swimming pool, spa or backyard living environment from the convenience of your home computer. It allows you to manage multiple pools from one central location, and offers features such as setting up automated water treatment schedules, adjusting water temperature, controlling pumps and lights and more. With Screenlogic Config, you can enjoy peace of mind knowing that all aspects of your outdoor paradise are being taken care of with ease.
Screenlogic Connect
Screenlogic Connect is an innovative pool control system that allows you to monitor and maintain your swimming pool from anywhere. With its intuitive app, it makes controlling the temperature, adjusting lights and cleaning cycles of your pool incredibly easy. It also offers advanced monitoring capabilities so you can keep an eye on the performance of your equipment no matter where you are in the world!
Pentair Screenlogic Gateway Not Found
If you’re using a Pentair ScreenLogic Gateway, but it isn’t connecting to your pool system or is showing as “Not Found,” then the first step should be to check that all wires are securely connected between the Pentair ScreenLogic Gateway and its base station. If everything appears to be properly connected, try resetting both the gateway and base station by unplugging them for 10 seconds before plugging them back in. Hopefully this simple process will restore the connection and allow you access again.
Pentair Screenlogic Rx Tx Lights
The Pentair Screenlogic Rx Tx Lights is a complete system designed to provide pool owners with the ability to control their entire backyard lighting experience from one convenient and easy-to-use interface. This system allows users to customize their lighting settings for any occasion, whether it be a simple party or an elaborate event. The lights are also equipped with features such as motion sensors and photocells that allow them to detect when people are entering or leaving the area, so no more having to manually turn on and off your lights!
With this system in place you can rest assured knowing that your backyard will always look just right for whatever event you may have planned!
Pentair Screenlogic Interface Wireless Link
The Pentair ScreenLogic Interface Wireless Link is an innovative pool and spa automation solution that provides remote access to your pool or spa from any compatible mobile device. With the ScreenLogic Interface, you can control all of your pool and spa functions with a single wireless link. You can easily adjust temperature settings, turn pumps on/off, set time clocks for filtration cycles, monitor water levels and more – from anywhere in the world!
Credit: www.semshred.com
What are the Colors of Screenlogic Light?
ScreenLogic lights come in a variety of colors, allowing you to customize your pool and spa’s lighting experience. The ScreenLogic light colors include:
* White
* Blue
* Red
* Green
* Multi-color, which allows you to create customized color scenes. With this range of options, it’s easy to find the right look for your backyard oasis.
How Do I Reset My Pentair Easy Touch Panel?
Pentair Easy Touch Panel can be easily reset with a few simple steps.
• Turn off the power to the panel by disconnecting the transformer or circuit breaker.
• Remove the faceplate of the control panel and locate its reset button.
• Press and hold down on this button for 3 seconds until it is fully depressed, then release it.
• Reconnect power to your system, wait 30 seconds, then replace your faceplate back onto your control panel. The EasyTouch system will now be reset to its factory defaults settings.
How to Setup Pentair Screenlogic?
Pentair ScreenLogic is a user-friendly interface that allows you to control your pool and spa equipment from any computer or mobile device. To setup Pentair ScreenLogic, follow these steps:• Install the software to your computer.
• Connect the USB cable from the computer to the Pool Control System (PCS).
• Open up your web browser and type in “192.168.1.10” into the address bar for PCS configuration page access.
• Follow instructions on screen and configure settings as desired.
Once installation is complete, you can start controlling your pool and spa equipment with ease!
How Do I Connect My Pentair Screenlogic to Wifi?
• Connect the ScreenLogic Interface to your router using an Ethernet cable.
• Download and install the ScreenLogicConnect App on your mobile device.
• Make sure that both devices are connected to the same WIFI network before proceeding further.
• After launching the app, select ‘Setup New Interface’ from the main menu and follow the instructions provided in order to connect it with your WiFi network.
This is how you can easily establish a connection between Pentair’s Screen Logic and any compatible wireless networks, allowing you to access all of its features remotely through a smartphone or tablet device.
Screen Logic Basic Trouble shooting
Conclusion
This blog post has provided an in-depth look at how to use Screenlogic Searching for System Controller. It is a useful tool that can help homeowners save time, energy and money when controlling their pool or spa system. With this handy application, users can easily access the settings of their pool or spa from anywhere with internet connection.
Furthermore, it makes managing these systems much more convenient and efficient than ever before. This blog post has shown how easy it is to get started with Screenlogic Searching for System Controller and its many benefits!